Page 1 of 2
MountFiend - aka MFiend
Posted: Wed Mar 16, 2005 11:12 pm
by Rollie
So I wrote this little UI mod which is not much more than an elaborate macro to help with rogue dismount and stealth. It is possible other classes could find this of use, but I wrote it specifically for while playing my rogue.
Basically you can bind a key that will trigger the only public function in the mod.
If you are mounted, you will dismount. Upon a second tap of the key, it will then stealth you. If you are not mounted, it will just stealth you. If you are stealthed, it will unstealth you.
Post comments/suggestions/etc here!
More info:
http://www.warcraftrealms.com/mfiend.php
Posted: Thu Mar 17, 2005 7:10 am
by Yeoman
What about downloadable version for Druid? They all are instant cast.
1. Unmount
2. Cat Form
3. Prowl
Posted: Thu Mar 17, 2005 10:08 am
by Rollie
It could be fairly easily modified to do that. I will see what I can do if I get some time this weekend.
Posted: Fri Mar 18, 2005 9:26 am
by Stormur
Ive realy like the idea whit the unmount mod.
I have been looking around for one of these.
The sad part that its for rogues. And i playe a warrior.
My idea was first for a macro to do this. But that didnt work so good
What i would like this one to do is:
1. Unmount
2. Charge
I have been trying to change it my self. But whit no luck at all.
Thanks
Posted: Fri Mar 18, 2005 10:18 am
by Rollie
I think all you would need to change for an unmount and charge would be to change one line:
In the function listed below, just chage "Stealth" to "Charge" and try it out.
Code: Select all
function MF_DismountAndStealth()
if( g_stealthID == -1 ) then
MFiend_FindSpell( "Stealth" );
end
local iMountIndex = MF_isMounted();
if( iMountIndex ~= -1 ) then
CancelPlayerBuff(iMountIndex-1);
elseif( g_stealthID ~= -1 ) then
CastSpell( g_stealthID, 1 );
end
end
Also, you'll need to change "Stealth" to "Charge" here too:
Code: Select all
function MFiend_OnLoad()
MFiend_FindSpell( "Stealth" );
SLASH_MFiend1 = "/mfiend";
SlashCmdList["MFiend"] = MF_DismountAndStealth;
end
This is assuming that Charge is the ability name too!
Posted: Fri Mar 18, 2005 2:21 pm
by Stormur
Thanks Rollie.
Dam i was close to fix it my self i changed those and 2 more i think before i gave up.
The Charge works fine. But the sad part is that it aint dismounting.
Sitting and trying to figure out what the problem might be.
I use the downloaded mod to change.
Thanks again for a nice mod.
Posted: Fri Mar 18, 2005 2:28 pm
by Rollie
It might be possible that the "Ability_Mount" doesn't work for all mounts, I'm not sure. I know it worked for me on a raptor, but it may not work for other mounts.
Posted: Fri Mar 18, 2005 7:43 pm
by Stormur
It feels like the solutions is so close so i just miss it.
I am riding a Kodo so i dont think its the "Ability_Mount".
The time ive tride to figure out what might be wrong. I get the feeling that
it is trying to do the charge ability before dissmount?
I am weary thankful for the help.
Posted: Sat Mar 19, 2005 3:33 am
by Shadowkiss
found a bug dealing with pally auras and the mod. If you have an aura on in the far right buff slot then you can't dismount with the hotkey. If any other buff is there it seems to work ok. If you are on your mount and move into range of a pally with an aura then you can dismount/stealth but then his aura becomes in the far right slot and you cant dismount again with the hotkey.
Devotion aura was the one it happened to me on.
Shadowkiss
Posted: Tue Mar 29, 2005 11:48 am
by Gravebane
I really love the concept of this mod. I don't have a problem with it dismounting me, but I'm getting an error message when I try to stealth after a dismount. Something about the g_StealthID comes up with I try to stealth. Some users from the Curse Gaming site stated that I need to reload the UI for it to work but that didnt fix my problem. I'm currently using the newest version of the Gypsy mod. Any help with this would be appreciated!
Posted: Thu Mar 31, 2005 7:03 pm
by Rollie
Hrmm.... I didn't think the latest release version had that problem but I suppose it is still possible.
If you get the error message, you can type
/mfiend reset
and it should correct itself (it does for me anyway). I'll have a new version up soon that should correct this for all cases.
New to this
Posted: Wed May 18, 2005 3:44 pm
by EvilNoodles
Hi, i downloaded the code zip file, installed it like any other mod, but i am confused on how to use it, is there a macro that i need to make to perform the task?
Any explaination would be ideal
thanks for your time
Cant stealth...
Posted: Tue May 31, 2005 8:20 am
by Holy
i have tried to use /mfiend reset... that does nothing for me, i have tried "/mfiend" & "/mfiend trigger" and the only thing it doe's for me is dismount... it doesent stealth... i might be doing something wrong... but plz the noobify it for me
Posted: Tue May 31, 2005 9:16 am
by Rollie
Under your keybindings, there should be an entry for MFiend that you can bind a key to that will trigger the mod.
Please note: There is some inconsistencies with the lastest live patch that I just haven't taken the time to work out yet. I have found it to be kind of spotty when I have item buffs displayed and/or some other buffs (like the Argent Dawn agent 'buff').
I have found that removing them and then reenabling them will allow the mod to work correctly. I just need to spend a little time messing with this to get it to work correctly and I just haven't done so.
Posted: Sat Jun 18, 2005 6:37 pm
by Guest
make it a macro for a button
Hey i would like to put this onto my bar as slot 6 so that when i go into stealth i can use pickpocket which is 6 as well. can you make it so that /mfiend trigger works for stealth or is there another cmd as the keybinding makes it every time i press 6 a mount/stealth hus cannot se pickpocket
Posted: Sat Jun 18, 2005 10:07 pm
by Rollie
You should be able to make a macro button for it that you can place in any toolslot you choose.
Posted: Mon Jul 11, 2005 6:35 am
by Guest
what command would i put into the macro?
Posted: Mon Jul 11, 2005 8:00 am
by Rollie
You should just have to put /mfiend into the macro.
Posted: Thu Jul 28, 2005 6:44 am
by Guest
putting just /mfiend unmounts but doesnt stealth..
Posted: Thu Jul 28, 2005 8:24 am
by Rollie
Ah, I'll have to do some testing on it then. I use the keybinding which works great for me.